wy
none
1A20-020N-00A3-2091-2172-6487*

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 2004-7-22 16:33:44
Nero版本： 6.3.1.20 (Nero Express)
刻录机： <TSSTcorp CDW/DVD TS-H492A>版本: TB51 - HA 0 TA 0 - 6.3.1.20
适配卡驱动程序： <nvatabus> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <Generic DVD-ROM >版本: 1.0 - HA 3 TA 0 - 6.3.1.20
适配卡驱动程序： <d347prt> HA 3

=== Scsi-Device-Map ===
CdRomPeripheral : TSSTcorp CDW/DVD TS-H492A nvatabus Port 0 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y120M0 nvatabus Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
TSSTcorp CDW/DVD TS-H492 E: CDRom0
Generic DVD-ROM H: CDRom1
=======================

AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048036kB)
Free physical memory: 621MB (636356kB)
Memory in use : 39 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

30.7.2005
CD-ROM (ISO)
20:32:03 #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

20:32:03 #2 Phase 89 File dlgbrnst.cpp, Line 1855
超级链接已激活

20:32:03 #3 Text 0 File Reader.cpp, Line 126
Reader running

20:32:03 #4 Text 0 File Writer.cpp, Line 124
Writer TSSTcorp CDW/DVD TS-H492A running

20:32:03 #5 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

20:32:03 #6 Text 0 File Burncd.cpp, Line 3173
Turn on 轨道一次刻录, using CD-R/RW media

20:32:03 #7 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 178738 ( 39:45.13)

20:32:03 #8 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)

20:32:03 #9 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: TSSTcorp CDW/DVD TS-H492A;
CDR code: 00 97 28 26; OSJ entry from: Multi Media Masters && Machinary SA
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 1C 1A (LI 97:28.26), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

20:32:03 #10 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================

20:32:03 #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 178739 (178739) = #178739/39:43.14
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 178737 blocks [TSSTcorp CDW/DVD TS-H492A]
--------------------------------------------------------------

20:32:04 #12 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [TSSTcorp CDW/DVD TS-H492A] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 366364672, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
178739 | lead-out | 1 | 0x00 | 0x41

20:32:04 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1030
Removed 2 run-out blocks from end of track 1. Length: 178739 -> 178737.

20:32:16 #14 Phase 24 File dlgbrnst.cpp, Line 1855
文件暂存过程开始

20:32:16 #15 Text 0 File Burncd.cpp, Line 4183
Cache writing successful.

20:32:16 #16 Phase 25 File dlgbrnst.cpp, Line 1855
文件暂存过程完成

20:32:16 #17 Phase 36 File dlgbrnst.cpp, Line 1855
以32x (4,800 KB/s)的速度开始刻录

20:32:16 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

20:32:16 #19 Text 0 File Mmc.cpp, Line 20531
Set BUFE: Super Link -> ON

20:33:54 #20 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

20:34:02 #21 Text 0 File Mmc.cpp, Line 15356
<TSSTcorpCDW/DVD TS-H492A> start Close Session

20:36:18 #22 SCSI -1135 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

20:36:18 #23 CDR -1135 File ThreadedTransferInterface.cpp, Line 1183
写错误

20:36:18 #24 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 1183
无法进行结束区段的动作

20:36:18 #25 Text 0 File Mmc.cpp, Line 15356
<TSSTcorpCDW/DVD TS-H492A> start Close Session

20:35:52 #26 SCSI -1135 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

20:35:52 #27 CDR -1135 File ThreadedTransferInterface.cpp, Line 1183
写错误

20:35:52 #28 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 1183
无法进行结束区段的动作

20:35:52 #29 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

20:35:57 #30 Phase 38 File dlgbrnst.cpp, Line 1855
以32x (4,800 KB/s)的速度刻录失败


Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=4, 2, 16, 0, size=92672 bytes, created 2004-7-16 13:53:14 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 16, 0, size=28672 bytes, created 2004-7-16 13:53:54 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 16, 0, size=7680 bytes, created 2004-7-16 13:57:12 (InCD4 driver for win NT/2K/XP)
File 'Drivers\nvatabus.sys': Ver=5.10.2600.0479 built by: WinDDK, size=87936 bytes, created 2004-12-7 16:15:54 (Adapter driver for rec)
File 'Drivers\d347prt.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 2004-8-22 16:31:48 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)